BARLEY - No. 1 COPPER WIRE
Shall consist of No. 1 bare, uncoated, unalloyed copper wire, not smaller than No. 16 B&S wire gauge (0,05082" = 1,291 mm). Green copper wire and hydraulically compacted material to be subject to agreement between Buyer and Seller.
BARLY - No. 1 COPPER WIRE
Shall consist of clean, unpinned, uncoated, unalloyed copper wire and cable, not smaller than No. 16 B&S wire gauge, free of burnt wire, which is brittle. Hydraulically compacted (i.e. pressed into blocks) copper subject to agreement.
BIRCH - No. 2 COPPER WIRE
Shall consist of miscellaneous, unalloyed copper wire having a nominal 96% copper content (minimum 94%) as determined by electrolytic. Assay. Should be free of the following:
• Excessively leaded, tinned, soldered copper wire
• Brass and bronze wire
• Excessive oil content, iron, and non-metallic’s
• Copper wire from burning, containing insulation
• Hair wire • Burnt wire which is brittle, and
• Should be reasonably free of ash. Hydraulically compacted copper subject to agreement. |
